Equipment

This article will walk you through connecting a pulse to a Tehama Submersible MDT Step 1: Install Device Select a proper place for the location

Step 1: Install Device Select a proper place for the location of the meter and the MDT.   Install the MDT device following appropriate local codes.

Prerequisites IP Addresses of each of the Devices Ethernet network between the devices and the Acquisuite needs to be connected. TCP Port 502 needs to

The Obvius Acquisuite has the ability to connect to BACnet IP devices that are connected to the same network.  Currently, BACnet MSTP is not available

Question What’s the difference between a standard pulse output and a KYZ pulse? Answer Imagine a standard pulse as a light switch.  On/Off.  The light

For best results, the cellular modem and the DCAP need to be at least 6-8 feet away to minimize radio interference between the devices.  \

Question What does the VOL on my Leviton 2000 display meter mean? Answer VOL means that the Phase to Neutral voltage is below normal.  When

Retrieving Logs with FTP Connection to Obvius Acquisuite Pre-Requisites FTP Client program such as Filezilla.   FTP Client must have set the FTP transfer mode to BINARY. (Very

The Accuenergy AXM-IO Module has the ability to connect 6 Pulse Outputs from Devices. Wire Connection Instructions 1. Connect the pulse output wire from the

This article works with Accuenergy AXM-WEB Push & AcuLink 810 Devices This article will walk you through programming your Accuenergy AXM-WEB or Aculink A810 to

This article works with Obvius A8810, A8812, A7810, and Leviton A8810, A8812, A7810 This article will walk you through logging in to your Obvius devices.

This article will walk you through programming your E-Gauge devices to push data to the Vitality platform. The E-Gauge device will push the values from