Overview

Recommended Settings:

Click on the Enter Button

• A password prompt should show:
  • Password:  71360
• Hit enter:
  • Select 
• Pipe material:
  • Flow:
    • Gallons
  • Flow units:
    • Gallons per minute
• Instrument fluid:
  • Water
• Pulse output:
  • Pulse type:
    • Volume
• Volume per pulse:
  • 1 gallon
• Pulse width:
  • 50 ms (default)
• Calibration:
  • Damping time :
    • 20 s
  • Zero-cutoff: .
    • 23 f/s
  • Zero offset:
    • 0 f/s
  • Calibration factor:
    • 1
• Totals:
  • Select totals:
    • On
  • Reset totals:
    • No
  • Inside diameter of the pipe
    • See Chart Below

Note:
If we see no pulses and an exclamation point!!  this means that the flow is reverse flow.