AccuvimII Ethernet Module
Using your internet browser, log into the Ethernet Module using the IP Address supplied by either the cell modem or IT network.
Change the Password
Settings → Management
Change the Communications Settings
Settings → Communications
Network Settings
Time/Date Settings
Datalog
HTTP/FTP Post
Save and Reboot.
After Reboot, go back to this same page and hit “Test HTTP Push 1”
You should get a Success Message. If not successful. Check your settings.
If successful, go to the next section.
If still not successful. Contact Vitality for more help.
Change the Meter Settings
On your computer open the AccuvimII Software
IP Address
Device Id
Make changes and Update Device.
Make changes and Update Device.
Review Real Time Readings
Amps, Volts, PF
- kWh